User menu

Lyn

Type of engine: 
steam

The World's newest steam loco is now at Woody Bay!

LYN at Woody Bay September 2017. (Jon Pain)


At its opening in May 1898, the legendary narrow-gauge Lynton & Barnstaple Railway in North Devon was equipped with three Manning Wardle 2-6-2 tank engines. Two months later they were joined by a Baldwin 2-4-2. The Baldwin was named 'LYN' but commonly referred to by the staff as 'The Yankee'.

LYN was built to a unique design, ordered and delivered in a very short time by the Baldwin Locomotive Works in Philadelphia, USA. When the Southern Railway took over the line in 1923, they added a letter E (For Eastleigh works - the Southern shed Pilton was seconded to) as well as the number 762.

Despite a few teething problems, LYN was a popular and distinctive engine that was also the most powerful on the line - on occasion pulling five-coach trains, one more than normally allowed.


Closure of the line came in September in 1935, and after the November auction - when LYN was sold for £50 - quickly reduced to a pile of scrap with only the nameplates, head-lamp and gauge glass surviving.

LYN in bits - Pilton Shed 1935 (LT Catchpole)


The 762 Club - a registered charity - was set up to construct, own and maintain a new LYN for operation on the new Lynton & Barnstaple Railway. The loco is not a replica, but a new-build and is the most advanced steam engine to-date built in the UK and will use a gas producer combustion system.


New Lyn Specifications

Wheel arrangement: 2-4-2T
Gauge: 1ft 11½
Length: 23ft 9in (over buffer beams)
Width: 6ft 8in
Height: 8ft 11in
Weight :21.1 tons tare, 25.7 tons gross
Coal capacity: ¾ ton
Water capacity: 660 gal
Boiler pressure: 250 Ib/sq. in
Combustion system: Gas producer combustion system with exhaust steam admission into primary air stream below the grate
Grate area: 8.1 sq.ft
Heating surfaces:

Firebox: 46.9 sq. ft
Tubes: 276.3 sq. ft
Superheater: 73.3 sq. ft

Cylinders: 2 x (8.66in bore x 16in stroke) with inside admission long-travel piston valves
Exhaust system: Four-nozzle Lempor system plus Kordina
Driving wheel diameter: 2ft 9in with Porta high-adhesion wheel profile
Leading wheel diameter: 1 ft 10in
Trailing wheel diameter:1 ft 10in
Rigid wheelbase: 5ft
Total wheelbase: 18ft 3in
Tractive effort: 7456 lbs (85% wp.)
HP: 319
KW: 238
Bearings: Roller bearings fitted to all axleboxes and motion, including valve gear.
Build date: 2017
Builder: Alan Keef Ltd, Ross-on-Wye
Works No.: 92

Timetable icon: 

Corporate Supporters - Where to Stay

The Denes button Fox and Goose button Lynton Cottage Hotel button Moorlands button